Solutions for Cold Storage

Sensaphone WEB600

With six universal inputs, the Sensaphone Web600 can be configured to watch your most critical conditions in your small computer room.

This is a Web-based product so current status, programming, and previous history can all be access quickly and conveniently through a web page. If any conditions deviate from normal, the Web600 will immediately send e-mail alarms, text messages, and even SNMP traps.

Learn more...

	WEB600 Battery Backup Monitoring for power failures in a computer room is a must, so the battery backup module for the Web600 is highly recommended.
	2.8K Temperature Sensor with Glass Bead Vial The glass bead filled vial provides a buffer from any momentary fluctuations that may cause a preliminary alarm dial out such as defrost cycles, opening of doors and fans circulating air.
	2.8K Temperature Probe Provides real time temperature sensing with programmable alarm limits.
	Zone Water Detector This sensor allows you to detect water on the floor. The alarm will trip if water touches anywhere along the 10 foot rope. The rope can even be extended to cover large areas or to isolate an area to detect water leaks.
	Humidity Transmitter Proper humidity levels are a key factor in the life of your servers. This sensor provides a real time humidity measurement so that both high and low levels can be custom programmed.

Sensaphone 400

The Sensaphone Model 400 provides the important functions that you need to monitor your vacation home, cabin, or primary home.

It has a built-in temperature sensor that you can program for any temperature level you need to warn for potential frozen pipes. The 400 will also detect power failures and even includes a microphone to listen for the sound of a smoke detector.

If any problems are detected, it will make four phone calls to you, your family, friends, or neighbors to announce the problem in your own customized voice.

Learn more...

	WEB600 Battery Backup Monitoring for power failures in a computer room is a must, so the battery backup module for the Web600 is highly recommended.
	2.8K Temperature Sensor with Glass Bead Vial The glass bead filled vial provides a buffer from any momentary fluctuations that may cause a preliminary alarm dial out such as defrost cycles, opening of doors and fans circulating air.
	2.8K Temperature Probe Provides real time temperature sensing with programmable alarm limits.
	Zone Water Detector This sensor allows you to detect water on the floor. The alarm will trip if water touches anywhere along the 10 foot rope. The rope can even be extended to cover large areas or to isolate an area to detect water leaks.
	Humidity Transmitter Proper humidity levels are a key factor in the life of your servers. This sensor provides a real time humidity measurement so that both high and low levels can be custom programmed.

Sensaphone 2800

The Sensaphone Model 2800 adds the ability to use wireless sensors in addition to hard–wired sensors. It can monitor up to 4 hard–wired, plus four wireless sensors and report alarms to eight custom voice phone calls.

A sealed Nema-4X outdoor enclosure and rechargeable battery backup is also included with the Model 2800.

Learn more...

	WEB600 Battery Backup Monitoring for power failures in a computer room is a must, so the battery backup module for the Web600 is highly recommended.
	2.8K Temperature Sensor with Glass Bead Vial The glass bead filled vial provides a buffer from any momentary fluctuations that may cause a preliminary alarm dial out such as defrost cycles, opening of doors and fans circulating air.
	2.8K Temperature Probe Provides real time temperature sensing with programmable alarm limits.
	Zone Water Detector This sensor allows you to detect water on the floor. The alarm will trip if water touches anywhere along the 10 foot rope. The rope can even be extended to cover large areas or to isolate an area to detect water leaks.
	Humidity Transmitter Proper humidity levels are a key factor in the life of your servers. This sensor provides a real time humidity measurement so that both high and low levels can be custom programmed.
	Wireless Temp Sensor Wirelessly monitors temperatures from -109° to 115°F.

Sensaphone IMS-1000

The IMS-1000 is similar to the Web600 in that it is a web-based monitoring solution, but it provides much more. Instead of monitoring up to six sensors, it can monitor from eight.

The IMS-1000 also has the option of a phone line connection in addition to the Ethernet computer network connection. So, even if your computer network is not working, the IMS-1000 can still use a standard phone line to notify of a problem. In addition to monitoring for physical problems, the IMS-1000 adds the ability to monitor server availability and alarm on a lack of response from any network device.

Learn more...

Ultra–Low Temp Sensor Designed to monitor temperatures from -122° to 53°F inside refrigerators and freezers.

Sensaphone IMS-4000

For a wide area enterprise solution, we recommend the IMS-4000. It is similar to the IMS-1000 with both the Ethernet connection and a phone line connection, but is designed for monitoring multiple locations.

The IMS-4000 system is made up of one Host and up to 31 Nodes that can be spread out over a large area. Each Host or Node can monitor up to eight sensors, and the group of Hosts and Nodes can be managed from one common interface.

The Nodes can be in a different room as the Host, or a different building, or even a different country. The IMS-4000 provides a very modular and expandable remote monitoring solution.

Learn more...

Ultra–Low Temp Sensor Designed to monitor temperatures from -122° to 53°F inside refrigerators and freezers.