Solutions for the Data Center

Sensaphone WEB600

With six universal inputs, the Sensaphone Web600 can be configured to watch your most critical conditions in your small computer room.

This is a Web-based product so current status, programming, and previous history can all be access quickly and conveniently through a web page. If any conditions deviate from normal, the Web600 will immediately send e-mail alarms, text messages, and even SNMP traps.

Learn more...

	WEB600 Battery Backup Monitoring for power failures in a computer room is a must, so the battery backup module for the Web600 is highly recommended.
	2.8K Temperature Probe Provides real time temperature sensing with programmable alarm limits.
	Zone Water Detector This sensor allows you to detect water on the floor. The alarm will trip if water touches anywhere along the 10 foot rope. The rope can even be extended to cover large areas or to isolate an area to detect water leaks.
	Humidity Transmitter Proper humidity levels are a key factor in the life of your servers. This sensor provides a real time humidity measurement so that both high and low levels can be custom programmed.

Sensaphone IMS-1000

The IMS-1000 is similar to the Web600 in that it is a web-based monitoring solution, but it provides much more. Instead of monitoring up to six sensors, it can monitor from eight.

The IMS-1000 also has the option of a phone line connection in addition to the Ethernet computer network connection. So, even if your computer network is not working, the IMS-1000 can still use a standard phone line to notify of a problem. In addition to monitoring for physical problems, the IMS-1000 adds the ability to monitor server availability and alarm on a lack of response from any network device.

Learn more...

	Room Temp Sensor Mounts on any flat surface to measure temperature in the room. User configurable to °C or °F.
	Room Temp Sensor with Display Indoor wall mount temperature sensor with the addition of a local temperature display. Available to read to either °C or °F.
	Mini Temp Sensor Used to measure the temperature inside a small space or inside cabinets.
	Ultra Low Temp Sensor Used to measure the temperature in extremely low temperature environments.
	Room Humidity Sensor Mounts on a wall to measure relative humidity in a room.
	Water Detection Sensor Detects the presence of water on the floor. Includes ten feet of water sensing rope.
	Power Failure Sensor Adds additional power failure monitoring to the IMS main unit.
	Current Sensor Connects in series with servers or other network equipment to monitor how much current is being used. Available to monitor 15 or 20 amps.
	Dry Contact Bridge Allows any dry contact to be interfaced with any of the IMS systems.
	4-20mA Bridge Allows any 4-20mA analog transducer to be interfaced with any of the IMS units.
	Magnetic Reed Switch Used to monitor a door to a room for unauthorized entry.
	Motion Sensor Used to monitor unauthorized access into data centers.
	Smoke Detector Detects smoke independently from the primary fire alarm system.

Sensaphone IMS-4000

For a wide area enterprise solution, we recommend the IMS-4000. It is similar to the IMS-1000 with both the Ethernet connection and a phone line connection, but is designed for monitoring multiple locations.

The IMS-4000 system is made up of one Host and up to 31 Nodes that can be spread out over a large area. Each Host or Node can monitor up to eight sensors, and the group of Hosts and Nodes can be managed from one common interface.

The Nodes can be in a different room as the Host, or a different building, or even a different country. The IMS-4000 provides a very modular and expandable remote monitoring solution.

Learn more...

	Room Temp Sensor Mounts on any flat surface to measure temperature in the room. User configurable to °C or °F.
	Room Temp Sensor with Display Indoor wall mount temperature sensor with the addition of a local temperature display. Available to read to either °C or °F.
	Mini Temp Sensor Used to measure the temperature inside a small space or inside cabinets.
	Ultra Low Temp Sensor Used to measure the temperature in extremely low temperature environments.
	Room Humidity Sensor Mounts on a wall to measure relative humidity in a room.
	Water Detection Sensor Detects the presence of water on the floor. Includes ten feet of water sensing rope.
	Power Failure Sensor Adds additional power failure monitoring to the IMS main unit.
	Current Sensor Connects in series with servers or other network equipment to monitor how much current is being used. Available to monitor 15 or 20 amps.
	Dry Contact Bridge Allows any dry contact to be interfaced with any of the IMS systems.
	4-20mA Bridge Allows any 4-20mA analog transducer to be interfaced with any of the IMS units.
	Magnetic Reed Switch Used to monitor a door to a room for unauthorized entry.
	Motion Sensor Used to monitor unauthorized access into data centers.
	Smoke Detector Detects smoke independently from the primary fire alarm system.