Solutions for the Home

Sensaphone 400

The Sensaphone Model 400 provides the important functions that you need to monitor your vacation home, cabin, or primary home.

It has a built-in temperature sensor that you can program for any temperature level you need to warn for potential frozen pipes. The 400 will also detect power failures and even includes a microphone to listen for the sound of a smoke detector.

If any problems are detected, it will make four phone calls to you, your family, friends, or neighbors to announce the problem in your own customized voice.

Learn more...

	2.8K Temperature Probe Provides real time temperature sensing with programmable alarm limits.
	Spot Water Detection Sensor Place this sensor in your basement to detect water on the floor from any type of pipe leak or sump pump overflow.
	Humidistat Detect high or low humidity inside the greenhouse.
	Dual Setback Thermostat For use with the 400 and 800 only, this is a “setback” thermostat with a LCD readout that has a programmable “home” and “away” temperature setting.
	Power Out Alert Monitor power outages by plugging the unit into any 110VAC outlet.
	Smoke Detector Detects smoke independently from the primary fire alarm system.
	Zone Water Detector This sensor allows you to detect water on the floor. The alarm will trip if water touches anywhere along the 10 foot rope. The rope can even be extended to cover large areas or to isolate an area to detect water leaks.
	Magnetic Reed Switch Used to monitor a door to a room for unauthorized entry.
	Infra–Red Motion Detector Detects movement in a specific area to monitor for unauthorized entry or intrusion. Covers approximately forty feet of area.
	Bluetooth Cell Phone Interface The Cell2Tel allows your Sensaphone to dial and receive calls using any cell phone with Bluetooth technology. For example, suppose land-line telephone service was unavailable at the Sensaphone’s location. By using the Cell2Tel you can provide telephone service to your Sensaphone simply by locating a cell phone next to the device. The Cell2Tel will send all incoming calls to the Sensaphone and when the Sensaphone needs to dial out the call will be seamlessly completed through the cell phone. The Cell2Tel is simply a wireless (Bluetooth) link between your Sensaphone and a cellular phone.

Sensaphone 800

The Sensaphone Model 800 provides the important functions that you need to monitor your vacation home, cabin, or primary home.

It has a built-in temperature sensor that you can program for any temperature level you need to warn for potential frozen pipes. The 800 will also detect power failures and even includes a microphone to listen for the sound of a smoke detector.

If any problems are detected, it will make eight phone calls to you, your family, friends, or neighbors to announce the problem in your own customized voice.

Learn more...

	2.8K Temperature Probe Provides real time temperature sensing with programmable alarm limits.
	Spot Water Detection Sensor Place this sensor in your basement to detect water on the floor from any type of pipe leak or sump pump overflow.
	Humidistat Detect high or low humidity inside the greenhouse.
	Dual Setback Thermostat For use with the 400 and 800 only, this is a “setback” thermostat with a LCD readout that has a programmable “home” and “away” temperature setting.
	Power Out Alert Monitor power outages by plugging the unit into any 110VAC outlet.
	Smoke Detector Detects smoke independently from the primary fire alarm system.
	Zone Water Detector This sensor allows you to detect water on the floor. The alarm will trip if water touches anywhere along the 10 foot rope. The rope can even be extended to cover large areas or to isolate an area to detect water leaks.
	Magnetic Reed Switch Used to monitor a door to a room for unauthorized entry.
	Infra–Red Motion Detector Detects movement in a specific area to monitor for unauthorized entry or intrusion. Covers approximately forty feet of area.
	Bluetooth Cell Phone Interface The Cell2Tel allows your Sensaphone to dial and receive calls using any cell phone with Bluetooth technology. For example, suppose land-line telephone service was unavailable at the Sensaphone’s location. By using the Cell2Tel you can provide telephone service to your Sensaphone simply by locating a cell phone next to the device. The Cell2Tel will send all incoming calls to the Sensaphone and when the Sensaphone needs to dial out the call will be seamlessly completed through the cell phone. The Cell2Tel is simply a wireless (Bluetooth) link between your Sensaphone and a cellular phone.

Sensaphone 2800

The Sensaphone Model 2800 adds the ability to use wireless sensors in addition to hard–wired sensors. It can monitor up to 4 hard–wired, plus four wireless sensors and report alarms to eight custom voice phone calls.

A sealed Nema-4X outdoor enclosure and rechargeable battery backup is also included with the Model 2800.

Learn more...

	2.8K Temperature Probe Provides real time temperature sensing with programmable alarm limits.
	Spot Water Detection Sensor Place this sensor in your basement to detect water on the floor from any type of pipe leak or sump pump overflow.
	Humidity Transmitter Proper humidity levels are a key factor in the life of your servers. This sensor provides a real time humidity measurement so that both high and low levels can be custom programmed.
	Humidistat Detect high or low humidity inside the greenhouse.
	Dual Setback Thermostat For use with the 400 and 800 only, this is a “setback” thermostat with a LCD readout that has a programmable “home” and “away” temperature setting.
	Power Out Alert Monitor power outages by plugging the unit into any 110VAC outlet.
	Smoke Detector Detects smoke independently from the primary fire alarm system.
	Zone Water Detector This sensor allows you to detect water on the floor. The alarm will trip if water touches anywhere along the 10 foot rope. The rope can even be extended to cover large areas or to isolate an area to detect water leaks.
	Magnetic Reed Switch Used to monitor a door to a room for unauthorized entry.
	Infra–Red Motion Detector Detects movement in a specific area to monitor for unauthorized entry or intrusion. Covers approximately forty feet of area.
	Bluetooth Cell Phone Interfacet The Cell2Tel allows your Sensaphone to dial and receive calls using any cell phone with Bluetooth technology. For example, suppose land-line telephone service was unavailable at the Sensaphone’s location. By using the Cell2Tel you can provide telephone service to your Sensaphone simply by locating a cell phone next to the device. The Cell2Tel will send all incoming calls to the Sensaphone and when the Sensaphone needs to dial out the call will be seamlessly completed through the cell phone. The Cell2Tel is simply a wireless (Bluetooth) link between your Sensaphone and a cellular phone.
	Wireless Temp Sensor Wirelessly monitors temperatures from -109° to 115°F inside the greenhouse.
	Wireless Humidity Sensor Monitors humidity from 0 to 95% RH.
	Wireless 4-20mA Sensor Used to monitor the output of any 4-20mA transducer.
	Wireless Dry Contact Sensor Connects to any normally open or normally closed output via input terminals on the front of the sensor.