Features & Specifications
IMS-4000:The SCALABLE SOLUTION
Whether your monitoring needs are a single server room or a wide area-network, IMS-4000 is the solution that will grow with your needs.
Each IMS-4000 network begins with an IMS-4000 Host unit. From the Host you can network additional remote monitoring Nodes, extending the reach of your IMS Solution.
Features
- Each Host supports up to 31 IMS-4000 Nodes
- Host and Node each monitor 8 environment conditions
- Supports 64 IP addresses per Host and Node
- Internal battery backup
- 1U rack-mountable configuration, or wall-mountable
- 230/115v auto-power sensing
- 100% Fault Tolerant: The IMS-4000 Host and Node have no moving components—non-volatile storage eliminates disk problems.
- Internal UPS: Each unit contains its own internal UPS so that power failures will not stop it from getting the message out when your infrastructure is in trouble.
- Cable failure: The IMS-4000 even senses the condition of cable connections. If a cable failure occurs in your infrastructure, you’ll be notified immediately.
- Monitor more than your network: With the use of the IMS Dry Contact Bridge, you can monitor devices outside your network that affect its environment, such as air conditioners and UPS systems.
- Data Logging: Full event-history and trending are provided with the IMS-4000 Data Logging feature. Userselectable sampling lets you store critical information about your infrastructure by the minute, hour or day. Data can be used for graphing, database or auditing and review.
-
- Shipping Weight
- 4 lbs.
-
- Batteries
- 12V 2.9Ah Sealed Gel Cell
-
- Telephone Connection
- FCC approved RJ-11 plug-in modular connector with 6' cord
-
- Operating Temperature Range
- Unit should be kept between 32 to 120° F
-
- Temperature Sensing Range
- -109º F to 140°F with remote temperature sensor
-
- NRTL listed for compliance with U.L. Standard 60950-1
-
-
Host Operating Specifications
-
-
- Temperature:
- 221 – 23° F
-
- Humidity:
- 5-90% RH non-condensing
-
- Power Supply:
- 90-260VAC 50/60Hz
-
- Power Consumption:
- 25 Watts
-
- Power Connection:
- IEC 320
-
- Dimensions:
- 1.75" H x 9.5" D x 19" W
-
- Backup Battery:
- 12V 2.9 AH Sealed Gel Cell
-
- Backup Time:
- 3.5 Hours
-
-
Host Communications Specifications
-
-
- Ethernet:
- 10/100 Base-T, 10/100Mbs
-
- RS-232:
- DB9, 9600bps, DTE
-
- Modem:
- 33.6Kbps
-
- Fax:
- Group 3, 14.4Kbps
-
- Voice Processor:
- Yes
-
-
Host Environmental Monitoring
-
-
- Internal Monitoring:
- AC Power (True RMS Voltage), Backup Battery Level, Sound Level (in dB)
-
- Number of Sensor Ports:
- 8
-
- Sensor Types:
- Temperature, Humidity, Water, Power, Infrared Motion, Smoke, Dry Contact, 4-20mA
-
- Sensor Input Connector:
- RJ-45
-
- Sesnor Cables:
- CAT-5, 568B
-
- Cable Length:
- 1000'
-
- Visual Indicators:
- LEDs, Normal and Alarm
-
- External Microphone:
- 3.5mm jack, electret condenser