Sensaphone Web600 Web-Based Monitoring System
Quick View
(larger image)
Inputs: 6 universal inputs - Normally Cosed/ Normally Open Dry Contact, 2.8K/ 10K Thermistor, 4-20mA Current Loop
Relay Outputs: Rated for 1A 30VAC/ 1A 30VDC Maximum
Alarm Notifications: 8 Alarm Escalation Levels - E-mail, Text Messages, and SNMP Traps
Special 
Features:
Web Programmable
Part 
Numbers:
Sensaphone Web600 Web-Based Monitoring System
FGD-W600
 Sensaphone Web600 Web-Based Monitoring System for 220VAC
FGD-W600-INT
 Web600 Battery Backup
FGD-W610-B
     
Sensaphone Web600 Functional Diagram

(click for larger image)

Sensaphone Web600 Web-Based Monitoring System

Web-Based Monitoring and Alarm Notification

The ALL NEW Sensaphone Web600 provides flexible web-based remote monitoring at an affordable price. Keep track of critical temperatures and other conditions and be notified immediately when current values exceed the normal range. Completely standalone and easy to use, the Web600 can be used for monitoring cold food storage, medical cold storage, and other temperature sensitive areas like computer rooms and data centers. In addition to temperature monitoring, the Web600 can also read values from humidity sensors, air quality sensors, water leak detection sensors and much more.

Sensor Inputs:
Connect up to six external sensors to monitor a variety of equipment and conditions. Each input zone can be connected to a temperature sensor, an analog transducer, or a dry contact switch.

Web Status:
Live status and history is only a webpage away. The Web600 built in web server provides quick and easy information about your monitored conditions. Even time stamped history reports are readily available online.

Alarm Notification:
When monitored conditions exceed normal values, the Web600 will notify you immediately be sending out e-mail alarm messages, and even text messages. Up to eight people can be contacted to make sure that proper action is taken.

Optional battery backup:
With the addition of the optional battery backup module, the Web600 can monitor for power failures and stay operational for two full hours while the power is out.

Web Programming:
Built in web server for easy access to programming and status. Just point your browser to the Web600's webpage and fill in the blanks for a quick configuration.

Sensaphone Web600 Web-Based Monitoring System

Accessories

Web600 Battery Backup
Product # FGD-W610-B

50 Foot Coil of Accessory Wire
Product # FGD-0010
50ft. of 22-gauge shielded wire for connecting sensors to your sensaphone.
Surge Suppressor Accessory for Power and Phone
Product # FGD-0067
The surge suppressor offers complete AC and phone line surge suppression for your Sensaphone and other electronic devices. The compact housing weighs less than 4 ounces. The retractable plug prevents scratching of expensive portable electronics. A set of RJ11 telephone line suppression jacks protect dialup and voice/modem lines. The suppressor offers 2 total outlets in a space saving direct plug-in format and diagnostic LEDs to warn of wiring problems and suppressor damage. $50,000 Ultimate Lifetime Insurance (USA & Canada Only).


Multi-Point Wireless I/O Accessory
Product # FGD-0205
The multi-point wireless I/O system is ideal if you need to connect one or two dry contacts and/or a 4-20mA transducer to a Sensaphone that is too far (or too expensive) to run cable. The system will replicate these sensors up to a distance of 600′ indoors or up to 4 miles line of site (flat terrain, raised antennas). The system includes a matched 1 Watt 900MHz transmitter and receiver. Two 24V power supplies and omnidirectional antennas are included. Built-in leds indicate RF link and dry contact status.


J Type Thermocouple / 4-20mA Converter Accessory
Product # FGD-0220
The thermocouple to 4-20mA converter is useful when monitoring very high or very low temperatures that can not be monitored with a standard Sensaphone temperature sensor. Thermocouples are available in a variety of packages that may be perfectly suited to your measuring application. Each thermocouple input module provides a single channel of thermocouple input which is filtered, isolated, amplified, linearized and converted to a 4-20mA output. Isolation is provided by transformer coupling, using a proprietary technique to suppress transmission of common mode spikes or surges. The modules have excellent stability over time and do not require recalibration.


Sensaphone Web600 Web-Based Monitoring System

Sensors

Contact Type Magnetic Reed Door and Window Switch
Product # FGD-0006
The magnetic reed switch may be used with all Sensaphone models to detect any unauthorized entry or intrusion. They are usually installed on doors and windows to detect their opening and closing. Several magnetic reed switches may be wired in series.


Contact Type Infrared Motion Detection Sensor
Product # FGD-0007
The passive infrared motion detection sensor can be used with all Sensaphone models to monitor the movement of warm bodies in a specific area. It will cause an alarm if motion is detected. Its range of detection covers approximately forty feet of area. Multiple sensors can be wired in series to a single output.


Contact Type Spot Water Detection Sensor
Product # FGD-0013
The water detection sensor can be used with all Sensaphone models to detect the presence of water on a horizontal surface. Independently powered by internal lithium batteries. The batteries should last for approximately 3-5 years. When the batteries start to run down, the sensor will automatically cause an alarm dial out when no water is present. Multiple sensors can be wired in series to a single input.


Contact Type Temp Alert Temperature Switch
Product # FGD-0022
The Temp Alert Temperature Switch can be used with all Sensaphone models to monitor air temperature from -30° to 130°F (-34° to 54°C). Simply determine the acceptable temperature limits for your application by adjusting the temperature limit arms. When the temperature exceeds the setting, the sensor triggers an alarm. The temp alert can be mounted to any wall or vertical surface. Multiple temp alerts may be wired in parallel to a single input. It requires no power for operation and mounts easily on any flat surface.


Contact Type Humidistat Humidity Switch
Product # FGD-0027
The Humidistat Humidity Switch can be used with all Sensaphone models to detect a high or low humidity level. The device will cause your Sensaphone to activate an alarm when the humidity level reaches a set threshold. Made from high impact plastic with a brushed goldtone dial plate and a beige cover. A nylon sensing element provides long life and accurate humidity control. With a range of 10% to 60% RH level, the sensor causes an alarm when the humidity exceeds or falls below the set limit. Multiple sensors may be wired to a single input.


Contact Type Smoke Detector Sensor for 110VAC
Product # FGD-0049
The Smoke Detector with built-in relay utilizes a photoelectric sensing method and is designed for use in commercial and residential applications. The device requires hard-wired 120VAC 60Hz power. The detector features two sets of dry alarm contacts: one form-A SPST and one form-C SPDT. The detector has tandem interconnect capability allowing up to 6 devices to be connected together. A 90dBA audible horn is included. The detector can be used with all Sensaphone models.


Contact Type Smoke Detector Sensor for 110VAC w/ Battery Backup
Product # FGD-0049-B
The Smoke Detector with built-in relay utilizes a photoelectric sensing method and is designed for use in commercial and residential applications. The device requires hard-wired 120VAC 60Hz power, but also includes internal battery backup. The detector features two sets of dry alarm contacts: one form-A SPST and one form-C SPDT. The detector has tandem interconnect capability allowing up to 6 devices to be connected together. A 90dBA audible horn is included. The detector can be used with all Sensaphone models.


4-20mA Type Humidity Sensor
Product # FGD-0052
A space mount, low profile humidity transducer. Transmits actually humidity levels to Sensaphone for programmable high and low alarm limits. Does not come with wire.


Contact Type PowerOut Alert Power Failure Switch
Product # FGD-0054
A compact power outage monitoring device to detect power failures. Easily plugs into any 110 VAC receptacle outlet for operation. Comes with 15 feet of wire.


Contact Type Zone Water Detection Sensor
Product # FGD-0056
The Sensaphone zone water detection sensor is for detecting the presence of water on a floor or in a FALSE ceiling. It comes with 10′ of WaterRope capable of covering a larger area than the FGD-0013 water sensor. Up to ten WaterRopes can be cascaded from a single sensor for even greater coverage. Works with all Sensaphone products and operates on two AA batteries (installed).


Water Rope Extension for Zone Water Detectors
Product # FGD-0063
Extends the water detection rope on the FGD-0056 sensor by an additional 10 feet.


4-20mA Type Carbon Monoxide (CO) Sensor
Product # FGD-0065
Carbon Monoxide is a highly toxic gas that has no color or odor. The Sensaphone Carbon Monoxide sensor will allow you to monitor CO levels from 0-300 ppm with any Sensaphone that will accept a 4-20mA input signal. The 1″ x .5″ LCD displays the PPM and menu parameters. The sensor will require a 24VDC power supply to operate (Part #FGD-0053).


4-20mA Type Air Quality Sensor
Product # FGD-0066
The Sensaphone Indoor Air Quality sensor will allow you to monitor levels of pollution from 0–100% with any Sensaphone that will accept a 4-20mA input signal. Popular applications include schoolrooms, office buildings, and parking garages. The Air Quality sensor uses a tin dioxide semiconductor sensor to detect oxidizable gases and is specially designed to have high sensitivity to gaseous organic materials which are components of indoor air pollutants. These air contaminants include cigarette smoke, cooking exhaust, automobile exhaust, solvents and many others. The sensor will require a 24VDC power supply to operate. (Part #FGD-0053).


4-20mA Type Carbon Dioxide (CO2) Sensor
Product # FGD-0068
The Sensaphone Carbon Dioxide sensor will allow you to monitor levels of Carbon Dioxide from 0-2,000ppm with any Sensaphone that will accept a 4-20mA input signal. The sensor will need a 24VDC power supply to operate (Part #FGD-0053).


2.8K Type Room Temperature Sensor
Product # FGD-0100
The 2.8K Room Temperature sensor enables monitoring temperatures at a location away from a Sensaphone unit. It will measure and report the exact temperature back to the Sensaphone unit to which it is attached. The Sensaphone can be programmed to trigger an alarm when conditions exceed the set high or low temperature limits. It may be mounted anywhere air temperatures need to be measured, however this model is recommended to be located in clean, dry environment. For outdoor use model FGD-0101 is recommended.


2.8K Type Weatherproof Temperature Sensor
Product # FGD-0101
The 2.8K Weatherproof Remote Temperature sensor enables monitoring temperatures at a location away from a Sensaphone unit. It will measure and report the exact temperature back to the Sensaphone unit to which it is attached. The Sensaphone can be programmed to trigger an alarm when conditions exceed the set high or low temperature limits. It may be mounted anywhere air temperatures need to be measured and is suitable for use in wet, dirty environments. This is a highly recommended sensor for every cold storage application above -20°F. For colder temperatures we recommend using sensor part number FGD-0101-TEF. NIST temperature certification is available.


2.8K Type Ultra Low Temperature Sensor w/ Teflon Cable
Product # FGD-0101-TEF
The 2.8K Ultra LowTemperature sensor enables monitoring temperatures at a location away from a Sensaphone unit. The Teflon coated wire will withstand temperatures down to -85°C. It will measure and report the exact temperature back to the Sensaphone unit to which it is attached. The Sensaphone can be programmed to trigger an alarm when conditions exceed the set high or low temperature limits. It may be mounted anywhere air temperatures need to be measured and is suitable for use in wet, dirty environments. NIST temperature certification is available.


10K Type Weatherproof Temperature Sensor
Product # FGD-0102
The 10K Weatherproof Temperature sensor enables monitoring temperatures at a location away from a Sensaphone unit. It will measure and report the exact temperature back to the Sensaphone unit to which it is attached. The Sensaphone can be programmed to trigger an alarm when conditions exceed the set high or low temperature limits. It may be mounted anywhere air temperatures need to be measured and is suitable for use in wet, dirty environments.


10K Type Indoor Decorator Zone Temperature Sensor
Product # FGD-0103
The 10K Indoor Decorator Zone Temperature sensor offers precision room temperature sensing in an attractive wall-mounted enclosure. Accurate to 0.36°F (0.2°C) with a sensing range of 35° to 140°F. The indoor decorator comes in a beige plastic enclosure, with a tan metal face plate. The sensor is designed to be wall-mounted indoors where appearance is important. The separate base plate may be mounted directly to the drywall or on a standard electrical outlet box without adapters. The cover is secured with tamper resistant hex screws.


10K Type Outdoor Air Weatherproof Temperature Sensor
Product # FGD-0104
The 10K Outdoor Air Temperature sensor is a sensitive temperature element with a stainless steel tube sheathe. It is mounted inside a ventilated, treated weather-resistant PVC shield to minimize radiant energy effects and mounted on a weatherproof outlet box for easy outdoor installation. Accurate to ±0.36°F (0.2°C) with a sensing range of -30° to 140°F. Eight feet of 24AWG wire is included.


10K Type Immersion Temperature Sensor
Product # FGD-0105
The 10K Immersion temperature sensor is a waterproof temperature sensor for measuring the temperature of fluids inside a pipe. It's constructed of brass WEL-B thermowell (which screws into a customer-supplied 0.5″ NPT saddle or Thredolet® fitting in a pipe). It fits into a thermowell via a brass 0.125″ NPT fitting. Accurate to ±0.36°F (0.2°C) and has a sensing range of 10° to 230°F. It also includes 8′ of 24AWG wire.


2.8K Type Temperature Sensor in Glass Bead Vial
Product # FGD-0107
The FGD-0107 is ideal for cold storage temperature monitoring. The glass bead filled vial will buffer any momentary fluctuations that may cause a preliminary alarm dial out, such as defrost cycles, opening of doors, and fans circulating air. The glass beads will slow the response time of the sensor allowing normal daily operations to occur without having an alarm initiated. This is a highly recommended sensor for every cold storage application above -20°F. For colder temperatures we recommended using sensor part number FGD-0107-TEF. NIST temperature certification is available.


2.8K Type Ultra Low Temperature Sensor in Glass Bead Vial w/ Teflon Cable
Product # FGD-0107-TEF
The FGD-0107-TEF is ideal for cold storage temperature monitoring. The glass bead filled vial will buffer any momentary fluctuations that may cause a preliminary alarm dial out, such as defrost cycles, opening of doors, and fans circulating air. The glass beads will slow the response time of the sensor allowing normal daily operations to occur without having an alarm initiated. The Teflon coated wire will withstand temperatures down to -85°C. This is a highly recommended sensor for every cold storage application below -20°F. NIST temperature certification is available.


Contact Type Float Level Switch
Product # FGD-0222
The Float Level Switch is a plastic side mounted float switch that is cost effective for level control applications in small tanks where it is more convenient to install a level switch through the sidewall of the tank. This style float switch can be rotated for Normally Open or Normally Closed operation. Combine two switches at different levels for high and low level or pump control or alarming.


Sensaphone Web600 Web-Based Monitoring System

Specifications

Name:Sensaphone Web600 Web-Based Monitoring System
Product #:FGD-W600
Alarm Notification Methods: E-Mail, Text Messages, SNMP Traps
  8 Alarm escalation levels
  Comprehensive scheduling per input, profile, and alarm destination
Destinations: 8 Programmable User Profiles
  4 programmable alarm destinations per profile
Communication Types: E-Mail – SMTP
  Text Messages
  Web page – Supported formats HTTP, PDA, WAP, and XML
  SNMP – MIB with Traps, GET, GETNEXT, and SET
  MODBUS®/TCP Slave Conformance Class 0 and 1
Inputs: 6 Universal Inputs
  Normally Closed / Normally Open Dry Contact
  2.8K / 10K Thermistor
  4-20mA Current Loop
  12 Bit Resolution
Relay Output: Rated for 1A 30VAC/ 1A 30VDC Maximum
Data Logging: 32,000 Samples (all samples include data date and time)
  1 second to 1 month sampling rate
  User programmable channel selection (Zones 1-6, Battery, and Input Power)
Communication Ports: Ethernet 10/100Base–T
Local Indicators: Alarm Status LED
  Power Status LED
  Ethernet link and Activity LEDs
Power Requirements: Comes with plug-in power supply. International power options available.
  Optional Battery Backup - Module (FGD-W610-B)
  Provides 2 hours of backup
Operating Conditions: 0-90% RH, non–condensing
  0–50°C (32–122°F)
Physical Properties: 5.5" x 3.25" x 1.25"
  0.5lbs
Standards: FCC Part 15–B Compliant

Sensaphone Web600 Web-Based Monitoring System

Support Documents/Downloads

PDF Sensaphone Web600 Brochure (pdf)
PDF Sensaphone Web600 Firmware Revision History & Upgrade Instructions (pdf)
Link Sensaphone Web600 SNMP MIB (mib)
Link Sensaphone Web600 Locator Software (exe)

NOTE: There are two product versions. Please take care in selecting the correct files.

Web600 w/Relay Output (6 Zones + Relay Output)

PDF Sensaphone Web600 w/Relay Output User Manual (pdf)
Link Sensaphone Web600 w/Relay Output Firmware v1.59 (bin)

Original Web600 (6 Zones)

PDF Sensaphone Web600 User Manual (pdf)
Link Sensaphone Web600 Firmware v1.46 (bin)

Sensaphone Web600 Web-Based Monitoring System

Video



Not sure what product is best for your application?