Quick View		(larger image)
Built In:	Power failure
Inputs:	8 dry contact, 6 analog
Outputs:	2 relay
Notifications:	Voice, e-mail, text message to cell phone, pager; up to 24 tiers of alarm destination contacts
Special  Features:	Wireless-no phone line; M2M control, Status and programming via web page; pump control; custom control
Part  Numbers:	Sensaphone Skymetry WTU-14 FGD-8200
	Sensaphone Skymetry WTU-14 with NEMA-4X Clear Door FGD-8200-CD
	Sensaphone Skymetry WTU-14 with NEMA-4X Solid Door FGD-8200-SD

Sensaphone Skymetry Wireless with Web Acces

(100% dedicated to interactive, two-way monitoring and control applications.)

For locations without a phone line, Skymetry's powerful monitoring alarm and control system uses built-in wireless technology that allows you to monitor your unattended remote facilities without telephone lines or specialized radio links. It provides wireless alarm delivery with a web-page interface for status, history, and programming.

Skymetry uses a specialized wide-area radio network to achieve maximum data delivery capability. Through this two-way network, you can receive detailed telemetry from your remote site when you want it. You can also transmit data directly to the site. Six analog inputs, eight dry contact inputs, and two output controls give Skymetry the ultimate edge in remote monitoring and control where other wireless products fail.

Skymetry's radio network is 100% dedicated to interactive, two-way monitoring and control applications. That is why there is no limit to how much data you can transmit from a site and how many alarms you may receive.

All the monitoring details of your remote site are stored within the Skymetry device itself, so there is no chance of a message not getting out if you do not have access to the Internet. While the monitoring services of a cellular telephone network require an intervening 'data processing' center to capture, scrutinize, and then dispatch the alarm messages to you, Skymetry operates as a peer-to-peer device on the network. You receive the messages directly from the Skymetry system, not from a Skymetry processing center. You'll gain more control over your unattended remote facilities than ever before. Alarms are dispatched directly to you and your support personnel instantly. You have the choice of receiving alarms through a voice telephone call, pager message, an e-mail message, or through our easy-to-use Skymetry website.

Details and information about your remote sites are available to you 24 hours a day, 7 days a week through the Skymetry website.

Today's complex infrastructure of remote managed facilities demands machine-to-machine capabilities, and Skymetry delivers on this challenge. Each Skymetry device has the ability to remotely control any of the outputs of up to eight remote Skymetry devices. Skymetry's built-in M2M capabilities far exceed those of many SCADA systems. There are no line-of-sight requirements. Whether 100 feet away or 100 miles, it is possible to monitor one site and remotely control a site several miles away. This means that a network of Skymetry devices are able to converse between one another to monitor and control specific actions without your intervention.

Sensaphone Skymetry Wireless with Web Acces

Accessories

	SkyChoice Service - 120 messages per month - 1 Yr. Product # FGD-8214
	SkyChoice Service - 120 messages per month - 2 Yr. Product # FGD-8215
	SkyChoice Service - 120 messages per month - 3 Yr. Product # FGD-8216
	SkyPlus Service - 500 messages per month - 1 Yr. Product # FGD-8217
	SkyPlus Service - 500 messages per month - 2 Yr. Product # FGD-8218
	SkyPlus Service - 500 messages per month - 3 Yr. Product # FGD-8219
	Accessory Wire Product # FGD-0010 50ft. of 22-gauge shielded wire for connecting sensors to your sensaphone.
	Solar Kit Product # FGD-0062
	J Type Thermocouple/4-20mA Converter Product # FGD-0220 The thermocouple to 4-20mA converter is useful when monitoring very high or very low temperatures that can not be monitored with a standard Sensaphone temperature sensor. Thermocouples are available in a variety of packages that may be perfectly suited to your measuring application. Each thermocouple input module provides a single channel of thermocouple input which is filtered, isolated, amplified, linearized and converted to a 4-20mA output. Isolation is provided by transformer coupling, using a proprietary technique to suppress transmission of common mode spikes or surges. The modules have excellent stability over time and do not require recalibration.
	USB to RS-232 Converter Product # FGD-0221 Configure your Sensaphone through serial communication using newer PCs not equipped with a serial port.
	1′ RG142 Antenna Cable Product # FGD-8252
	3′ RG142 Antenna Cable Product # FGD-8253
	80 Hour 12V Battery Kit-Panel Product # FGD-8254
	15′ RG142 Antenna Cable Product # FGD-8255
	High Gain Antenna w/15′ Cable Product # FGD-8256
	StationSitter 5AH Battery Product # FGD-8310

Sensaphone Skymetry Wireless with Web Acces

Sensors

	Magnetic Reed Switch Product # FGD-0006 The magnetic reed switch may be used with all Sensaphone models to detect any unauthorized entry or intrusion. They are usually installed on doors and windows to detect their opening and closing. Several magnetic reed switches may be wired in series.
	Infra-Red Motion Detector Product # FGD-0007 The passive infra-red motion detector can be used with all Sensaphone models to monitor the movement of warm bodies in a specific area. It will cause an alarm if motion is detected. Its range of detection covers approximately forty feet of area. Multiple sensors can be wired in series to a single output.
	Spot Water Detector Product # FGD-0013 The water detection sensor can be used with all Sensaphone models to detect the presence of water on a horizontal surface. Independently powered by internal lithium batteries. The batteries should last for approximately 3-5 years. When the batteries start to run down, the sensor will automatically cause an alarm dial out when no water is present. Multiple sensors can be wired in series to a single input.
	Temp Alert Product # FGD-0022 The Temp Alert can be used with all Sensaphone models to monitor air temperature from -30° to 130°F (-34° to 54°C). Simply determine the acceptable temperature limits for your application by adjusting the temperature limit arms. When the temperature exceeds the setting, the sensor triggers an alarm. The temp alert can be mounted to any wall or vertical surface. Multiple temp alerts may be wired in parallel to a single input. It requires no power for operation and mounts easily on any flat surface.
	Humidistat Product # FGD-0027 The Humidistat can be used with all Sensaphone models to detect a high or low humidity level. The device will cause your Sensaphone to activate an alarm when the humidity level reaches a set threshold. Made from high impact plastic with a brushed goldtone dial plate and a beige cover. A nylon sensing element provides long life and accurate humidity control. With a range of 10% to 60% RH level, the sensor causes an alarm when the humidity exceeds or falls below the set limit. Multiple sensors may be wired to a single input.
	Smoke Detector 110VAC Product # FGD-0049 The Smoke Detector with built-in relay utilizes a photoelectric sensing method and is designed for use in commercial and residential applications. The device requires hard-wired 120VAC 60Hz power. The detector features two sets of dry alarm contacts: one form-A SPST and one form-C SPDT. The detector has tandem interconnect capability allowing up to 6 devices to be connected together. A 90dBA audible horn is included. The detector can be used with all Sensaphone models.
	Smoke Detector 110VAC with Battery backup Product # FGD-0049-B The Smoke Detector with built-in relay utilizes a photoelectric sensing method and is designed for use in commercial and residential applications. The device requires hard-wired 120VAC 60Hz power, but also includes internal battery backup. The detector features two sets of dry alarm contacts: one form-A SPST and one form-C SPDT. The detector has tandem interconnect capability allowing up to 6 devices to be connected together. A 90dBA audible horn is included. The detector can be used with all Sensaphone models.
	Humidity Transmitter (4-20mA) Product # FGD-0052 A space mount, low profile humidity transducer. Transmits actually humidity levels to Sensaphone for programmable high and low alarm limits. Does not come with wire.
	PowerOut Alert Model PS-110 Product # FGD-0054 A compact power outage monitoring device to detect power failures. Easily plugs into any 110 VAC receptacle outlet for operation. Comes with 15 feet of wire.
	Zone Water Detector Product # FGD-0056 The Sensaphone zone water detector is for detecting the presence of water on a floor or in a FALSE ceiling. It comes with 10′ of WaterRope capable of covering a larger area than the FGD-0013 water sensor. Up to ten WaterRopes can be cascaded from a single sensor for even greater coverage. Works with all Sensaphone products and operates on two AA batteries (installed).
	Tipping Bucket Rain Gauge Product # FGD-0061
	Extra 10′ Water Detection Rope Product # FGD-0063 Extends the water detection rope on the FGD-0056 sensor by an additional 10 feet.
	10K Remote Weatherproof Temperature Sensor Product # FGD-0102 The 10K Weatherproof Remote Temperature sensor enables monitoring temperatures at a location away from a Sensaphone unit. It will measure and report the exact temperature back to the Sensaphone unit to which it is attached. The Sensaphone can be programmed to trigger an alarm when conditions exceed the set high or low temperature limits. It may be mounted anywhere air temperatures need to be measured and is suitable for use in wet, dirty environments.
	10K Indoor Decorator Zone Temperature Sensor Product # FGD-0103 The 10K indoor decorator zone temperature sensor offers precision room temperature sensing in an attractive wall-mounted enclosure. Accurate to 0.36°F (0.2°C) with a sensing range of 35° to 140°F. The indoor decorator comes in a beige plastic enclosure, with a tan metal face plate. The sensor is designed to be wall-mounted indoors where appearance is important. The separate base plate may be mounted directly to the drywall or on a standard electrical outlet box without adapters. The cover is secured with tamper resistant hex screws.
	10K Outdoor Air Weatherproof Temperature Sensor Product # FGD-0104 The 10K Outdoor Air Weatherproof Temperature sensor is a sensitive temperature element with a stainless steel tube sheathe. It is mounted inside a ventilated, treated weather-resistant PVC shield to minimize radiant energy effects and mounted on a weatherproof outlet box for easy outdoor installation. Accurate to ±0.36°F (0.2°C) with a sensing range of -30° to 140°F. Eight feet of 24AWG wire is included.
	10K Immersion Temperature Sensor Product # FGD-0105 The 10K Immersion temperature sensor is a waterproof temperature sensor for measuring the temperature of fluids inside a pipe. It's constructed of brass WEL-B thermowell (which screws into a customer-supplied 0.5″ NPT saddle or Thredolet® fitting in a pipe). It fits into a thermowell via a brass 0.125″ NPT fitting. Accurate to ±0.36°F (0.2°C) and has a sensing range of 10° to 230°F. It also includes 8′ of 24AWG wire.
	Float Switch Product # FGD-0222 The FGD-0222 float switch is a plastic side mounted float switch that is cost effective for level control applications in small tanks where it is more convenient to install a level switch through the sidewall of the tank. This style float switch can be rotated for Normally Open or Normally Closed operation. Combine two switches at different levels for high and low level or pump control or alarming.

Sensaphone Skymetry Wireless with Web Acces

Specifications

Name:	Sensaphone Skymetry Wireless with Web Acces
Product #:	FGD-8200
Advanced Capabilities:	Unlimited alarm delivery capacity
	No restrictions on inquiry
	Built in M2M technology
	Compact integrated-monitoring WTU (Wireless Telemetry Unit) for easy installation to panel
	No FCC License required
	Serial port for onsite direct connection
	Solar-ready ensures operation without line power
	Duplex and Simplex pump-control ready
ENVIRONMENTAL INPUTS:
Number of Dry Contact Inputs:	8
Dry Contact Input Types :	N.O./N.C. contact, pulse count, equipment run time
Dry Contact Input Electrical Characteristics:	47K to 5V
Number of Analog Inputs:	6
Analog Input Types:	10K thermistor (-60 to 175 deg F) and 4-20mA (-10,000 to 10,000)
Analog Input Electrical Characteristics:	22K to 2.5V (temperature) and 250 Ohms to ground (4-20mA)
Input Connector:	Terminal block
A/D Converter Resolution:	10 bits ±2 LSB
Input Protection:	Metal Oxide Varistors and fast acting diode clamps
RELAY OUTPUTS:
Number of Relay Outputs:	2
Rating:	0.3A 120VAC / 1.0A 24VDC
Type:	SPDT Form-C Latching
Relay Output Connector:	Terminal block
LED INDICATORS:
Function:	Alarm, Radio Registered, Radio In Range, Battery OK, and Power OK, Output #1, Output #2
Power Supply:	15VDC 800mA power transformer
Power Consumption:	50mA typical, 700mA burst (radio transmit)
Power Protection:	Metal Oxide Varistor
Battery Backup/Charger:	Compatible with 12V sealed gel-cell, 2.2AH (36hrs)-12AH (200 hrs)
ENVIRONMENTAL:
Operating Temperature:	-20° to 158°F (-29° to 70°C)
Operating Humidity:	0 to 90% RH non-condensing
Storage Temperature:	Storage Temperature
SKYMETRY UNIT:
Dimensions:	8.0″h x 6.1″w x 1.6″d
Weight:	1.2 lbs.
Enclosure:	Aluminum housing with mounting brackets
SKYMETRY UNIT IN NEMA-4 ENCLOSURE:
Dimensions:	12″h x 8″w x 6″d
Weight:	8 lbs.

Sensaphone Skymetry Wireless with Web Acces

Support Documents/Downloads

	Sensaphone Skymetry Manual (pdf)
	Sensaphone Skymetry Brochure (pdf)
	Sensaphone Skymetry Upgrade Form (pdf)