| ENVIRONMENTAL INPUTS |
| Number of Zones: |
8 |
| Zone Connector: |
terminal block |
| Zone Types: |
N.O./N.C. contact, 2.8K and 10K thermistor (-20 to 150 deg F), and 4-20mA (-10,000 to 10,000) |
| Zone characteristics: |
10K. to 5V (temperature/contact) or 237 Ohms to ground (4-20mA) |
| A/D Converter Resolution: |
10 bits ±2 LSB |
| Zone Protection: |
Gas discharge tubes, PTC fuses, and fast acting diode clamps |
 |
| MICROPHONE |
| Internal: |
for recording custom voice messages |
| External (optional): |
For listening-in to on-site sounds and high sound level alarms |
| Mic Connector: |
terminal block |
| Mic Type: |
Electret Condenser |
| Mic Impedance: |
2.2K |
|
| PHONE INTERFACE |
| Terminals: |
connection to a two-wire analog telephone line |
| |
Line Seizure |
|
| LED INDICATORS |
| |
(8) Zone Alarms, Sound, Power, Battery OK, Phone in Use, Output On, and System On |
|
| PUMP CONTROL INPUTS |
| Level Sensor: |
Optically isolated 4–20mA input for connecting to a well-level transducer. |
| Float Inputs (3): |
Optically isolated dry contact inputs for connecting to float switches. |
|
| RELAY OUTPUT |
| 2A 120VAC/2A 24VDC: |
Programmable for manual switching or automatic switching on alarm. |
|
| PUMP OUTPUTS (2) |
| 2A 120VAC/2A 24VDC: |
Programmable for duplex alternating pump control in Fill or Drain mode. |
|
| POWER SUPPLY |
| Power Supply: |
120VAC/12VAC 60Hz 10W wall plug-in transformer |
| Power Consumption: |
5 Watts |
| Power Protection: |
Metal Oxide Varistor |
| Battery Backup: |
12V rechargeable (optional) |
| 24V Output: |
24VDC 40mA max. |
|
| ENVIRONMENTAL |
| Operating Temperature: |
32-122 deg F (0-50 deg C) |
| Operating Humidity: |
0-90% RH non-condensing |
| Storage Temperature: |
32-140 deg F |
|
| PHYSICAL |
| Dimensions: |
10.5"h x 8.3"w x 1.8"d |
| Weight: |
3.5 lbs. |
| Enclosure: |
Aluminum housing with integral mounting flanges for wall or panel installation. |
