Quick View		(larger image)
Built In:	Power Failure, Sound Level (requires optional external microphone)
Inputs:	8 - Select temperature, dry contact, or 4-20mA analog
Outputs:	1 universal relay, 2 pump control relays
Notifications:	8 numbers - Select custom voice, numeric pager, or cell phone text message
Special  Features:	Alternating Duplex Pump control for Fill or Drain applications. Web status page including status and alarm history
Part  Numbers:	Sensaphone STATIONSitter FGD-8300
	Sensaphone STATIONSitter with NEMA-4X Solid Door FGD-8300-SD

Sensaphone STATIONSitter

(Ideal for monitoring pump stations and water facilities)

Sensaphone STATIONSitter provides the same 8-channel monitoring power as the Sensaphone 1800, but adds the convenience of duplex pump control logic for industrial Fill or Drain applications.

Each input channel can accept a NO/NC contact, 4-20mA , or temperature sensor. A universal output relay for local notification is also included. Configuration is quick and easy with simple voice-prompted keypad programming. The password-protected keypad also restricts local programming access.

STATIONSitter delivers alarm messages via voice phone calls, or text messages to cell phones and pagers. Up to 8 phone numbers or pagers can be contacted for alarms. Individual user acknowledgment codes track who responds to each alarm. Spoken detailed alarm history is available with just a few local keystrokes.

Call into STATIONSitter from any Touch-Tone phone to check the status of all monitored conditions, hear a spoken list of recent alarms, or to make programming changes.

The STATIONSitter comes with an internal microphone for custom voice message recording and accepts an optional external microphone for monitoring high sound alarms. The external microphone can also be used as a remote listen-in feature.

The STATIONSitter automatically monitors for power failure (requires an optional battery backup), and comes with a built-in 24 volt DC supply to power 4- 20mA loops. The STATIONSitter is designed with superior internal lightning protection. Other features include telephone Line Seizure and a panel-mount enclosure with built-in mounting tabs. An optional NEMA-4X enclosure is available.

Sensaphone STATIONSitter

Accessories

	Accessory Wire Product # FGD-0010 50ft. of 22-gauge shielded wire for connecting sensors to your sensaphone.
	ISOTEL Surge Protector Product # FGD-0023
	External Microphone Attachment Product # FGD-0057 Provides listen-in and/or high sound alarm capability at a remote location away from your Sensaphone. Comes with 25 feet of wire.
	J Type Thermocouple/4-20mA Converter Product # FGD-0220 The thermocouple to 4-20mA converter is useful when monitoring very high or very low temperatures that can not be monitored with a standard Sensaphone temperature sensor. Thermocouples are available in a variety of packages that may be perfectly suited to your measuring application. Each thermocouple input module provides a single channel of thermocouple input which is filtered, isolated, amplified, linearized and converted to a 4-20mA output. Isolation is provided by transformer coupling, using a proprietary technique to suppress transmission of common mode spikes or surges. The modules have excellent stability over time and do not require recalibration.
	StationSitter 5AH Battery Product # FGD-8310

Sensaphone STATIONSitter

Sensors

	Magnetic Reed Switch Product # FGD-0006 The magnetic reed switch may be used with all Sensaphone models to detect any unauthorized entry or intrusion. They are usually installed on doors and windows to detect their opening and closing. Several magnetic reed switches may be wired in series.
	Infra-Red Motion Detector Product # FGD-0007 The passive infra-red motion detector can be used with all Sensaphone models to monitor the movement of warm bodies in a specific area. It will cause an alarm if motion is detected. Its range of detection covers approximately forty feet of area. Multiple sensors can be wired in series to a single output.
	Spot Water Detector Product # FGD-0013 The water detection sensor can be used with all Sensaphone models to detect the presence of water on a horizontal surface. Independently powered by internal lithium batteries. The batteries should last for approximately 3-5 years. When the batteries start to run down, the sensor will automatically cause an alarm dial out when no water is present. Multiple sensors can be wired in series to a single input.
	Temp Alert Product # FGD-0022 The Temp Alert can be used with all Sensaphone models to monitor air temperature from -30° to 130°F (-34° to 54°C). Simply determine the acceptable temperature limits for your application by adjusting the temperature limit arms. When the temperature exceeds the setting, the sensor triggers an alarm. The temp alert can be mounted to any wall or vertical surface. Multiple temp alerts may be wired in parallel to a single input. It requires no power for operation and mounts easily on any flat surface.
	Humidistat Product # FGD-0027 The Humidistat can be used with all Sensaphone models to detect a high or low humidity level. The device will cause your Sensaphone to activate an alarm when the humidity level reaches a set threshold. Made from high impact plastic with a brushed goldtone dial plate and a beige cover. A nylon sensing element provides long life and accurate humidity control. With a range of 10% to 60% RH level, the sensor causes an alarm when the humidity exceeds or falls below the set limit. Multiple sensors may be wired to a single input.
	Smoke Detector 110VAC Product # FGD-0049 The Smoke Detector with built-in relay utilizes a photoelectric sensing method and is designed for use in commercial and residential applications. The device requires hard-wired 120VAC 60Hz power. The detector features two sets of dry alarm contacts: one form-A SPST and one form-C SPDT. The detector has tandem interconnect capability allowing up to 6 devices to be connected together. A 90dBA audible horn is included. The detector can be used with all Sensaphone models.
	Smoke Detector 110VAC with Battery backup Product # FGD-0049-B The Smoke Detector with built-in relay utilizes a photoelectric sensing method and is designed for use in commercial and residential applications. The device requires hard-wired 120VAC 60Hz power, but also includes internal battery backup. The detector features two sets of dry alarm contacts: one form-A SPST and one form-C SPDT. The detector has tandem interconnect capability allowing up to 6 devices to be connected together. A 90dBA audible horn is included. The detector can be used with all Sensaphone models.
	Humidity Transmitter (4-20mA) Product # FGD-0052 A space mount, low profile humidity transducer. Transmits actually humidity levels to Sensaphone for programmable high and low alarm limits. Does not come with wire.
	PowerOut Alert Model PS-110 Product # FGD-0054 A compact power outage monitoring device to detect power failures. Easily plugs into any 110 VAC receptacle outlet for operation. Comes with 15 feet of wire.
	Zone Water Detector Product # FGD-0056 The Sensaphone zone water detector is for detecting the presence of water on a floor or in a FALSE ceiling. It comes with 10′ of WaterRope capable of covering a larger area than the FGD-0013 water sensor. Up to ten WaterRopes can be cascaded from a single sensor for even greater coverage. Works with all Sensaphone products and operates on two AA batteries (installed).
	Tipping Bucket Rain Gauge Product # FGD-0061
	Extra 10′ Water Detection Rope Product # FGD-0063 Extends the water detection rope on the FGD-0056 sensor by an additional 10 feet.
	Remote Temperature Sensor 2.8K Product # FGD-0100 The 2.8K Remote Temperature sensor enables monitoring temperatures at a location away from a Sensaphone unit. It will measure and report the exact temperature back to the Sensaphone unit to which it is attached. The Sensaphone can be programmed to trigger an alarm when conditions exceed the set high or low temperature limits. It may be mounted anywhere air temperatures need to be measured, however this model is recommended to be located in clean, dry environment. For outdoor use model FGD-0101 is recommended.
	2.8K Weatherproof Temperature Sensor Product # FGD-0101 The 2.8K Weatherproof Remote Temperature sensor enables monitoring temperatures at a location away from a Sensaphone unit. It will measure and report the exact temperature back to the Sensaphone unit to which it is attached. The Sensaphone can be programmed to trigger an alarm when conditions exceed the set high or low temperature limits. It may be mounted anywhere air temperatures need to be measured and is suitable for use in wet, dirty environments.
	10K Remote Weatherproof Temperature Sensor Product # FGD-0102 The 10K Weatherproof Remote Temperature sensor enables monitoring temperatures at a location away from a Sensaphone unit. It will measure and report the exact temperature back to the Sensaphone unit to which it is attached. The Sensaphone can be programmed to trigger an alarm when conditions exceed the set high or low temperature limits. It may be mounted anywhere air temperatures need to be measured and is suitable for use in wet, dirty environments.
	10K Indoor Decorator Zone Temperature Sensor Product # FGD-0103 The 10K indoor decorator zone temperature sensor offers precision room temperature sensing in an attractive wall-mounted enclosure. Accurate to 0.36°F (0.2°C) with a sensing range of 35° to 140°F. The indoor decorator comes in a beige plastic enclosure, with a tan metal face plate. The sensor is designed to be wall-mounted indoors where appearance is important. The separate base plate may be mounted directly to the drywall or on a standard electrical outlet box without adapters. The cover is secured with tamper resistant hex screws.
	10K Outdoor Air Weatherproof Temperature Sensor Product # FGD-0104 The 10K Outdoor Air Weatherproof Temperature sensor is a sensitive temperature element with a stainless steel tube sheathe. It is mounted inside a ventilated, treated weather-resistant PVC shield to minimize radiant energy effects and mounted on a weatherproof outlet box for easy outdoor installation. Accurate to ±0.36°F (0.2°C) with a sensing range of -30° to 140°F. Eight feet of 24AWG wire is included.
	10K Immersion Temperature Sensor Product # FGD-0105 The 10K Immersion temperature sensor is a waterproof temperature sensor for measuring the temperature of fluids inside a pipe. It's constructed of brass WEL-B thermowell (which screws into a customer-supplied 0.5″ NPT saddle or Thredolet® fitting in a pipe). It fits into a thermowell via a brass 0.125″ NPT fitting. Accurate to ±0.36°F (0.2°C) and has a sensing range of 10° to 230°F. It also includes 8′ of 24AWG wire.
	Float Switch Product # FGD-0222 The FGD-0222 float switch is a plastic side mounted float switch that is cost effective for level control applications in small tanks where it is more convenient to install a level switch through the sidewall of the tank. This style float switch can be rotated for Normally Open or Normally Closed operation. Combine two switches at different levels for high and low level or pump control or alarming.

Sensaphone STATIONSitter

Specifications

Name:	Sensaphone STATIONSitter
Product #:	FGD-8300
ENVIRONMENTAL INPUTS:
Number of Zones:	8
Zone Connector:	Terminal block
Zone Types:	N.O./N.C. contact, 2.8K and 10K thermistor (-20 to 150 deg F), and 4-20mA (-10,000 to 10,000)
Zone characteristics:	10K. to 5V (temperature/contact) or 237 Ohms to ground (4-20mA)
A/D Converter Resolution:	10 bits ±2 LSB
Zone Protection:	Gas discharge tubes, PTC fuses, and fast acting diode clamps
MICROPHONE:
Internal:	For recording custom voice messages
External(optional):	For listening-in to on-site sounds and high sound level alarms.
Mic Connector:	Terminal block
Mic Type:	Electret Condenser
Mic Impedance:	2.2K
PHONE INTERFACE:
Terminals:	Connection to a two-wire analog telephone line. Line Seizure.
LED INDICATORS:
Indicators:	(8) Zone Alarms, Sound, Power, Battery OK, Phone in Use, Output On, and System On
PUMP CONTROL INPUTS:
Level Sensor:	Optically isolated 4-20mA input for connecting to a well-level transducer.
Float Inputs (3):	Optically isolated dry contact inputs for connecting to float switches.
RELAY OUTPUT:
2A 120VAC/2A 24VDC:	Programmable for manual switching or automatic switching on alarm.
PUMP OUTPUTS (2):
2A 120VAC/2A 24VDC:	Programmable for duplex alternating pump control in Fill or Drain mode
POWER SUPPLY:
Power Supply:	120VAC/12VAC 60Hz 10W wall plug-in transformer
Power Consumption:	5 Watts
Power Protection:	Metal Oxide Varistor
Battery Backup:	12V rechargeable (optional)
24V Output:	24VDC 40mA max
ENVIRONMENTAL:
Operating Temperature:	32-122 deg F (0-50 deg C)
Operating Humidity:	0-90% RH non-condensing
Storage Temperature:	32-140 deg F
PHYSICAL:
Dimensions:	10.5″h x 8.3″w x 1.8″d
Weight:	3.5 lbs
Enclosure:	Aluminum housing with integral mounting flanges for wall or panel installation.

Sensaphone STATIONSitter

Support Documents/Downloads

	Sensaphone STATIONSitter Manual (pdf)
	Sensaphone STATIONSitter Brochure (pdf)